Cisco 1240 Hardware Installation Manual page 81

Chapter 5 Mounting the Router
Do not tighten the hardware until
to slide the router onto the bracket.
Step 3 Repeat
Slide the router onto the bracket by inserting the hinge bolts you attached in
Step 4
hang slots (
Figure 5-14
1
2
Attach the six remaining sets of hardware to each side of the bracket and router (3 sets on each side), as
Step 5
shown in
Use a socket wrench to evenly tighten all four bolts, using 6-7 foot-pounds of torque.
Step 6
OL-26223-04
Step
Step 2 on the other side of the router.
2 ).
Attach One Hinge Bolt to Each Side of the Router
Figure 5-15.
6. There must be enough space between the washer and the router
Cisco 1240 Connected Grid Router Hardware Installation Guide
Mounting Instructions
Step 2 into the bracket quick
5-17