Chapter 8 Unmounting The Router - Cisco 1240 Hardware Installation Manual

Unmounting Instructions
Remove the ground wire located at the side of the router.
Step 6
Remove the security panel from the unit (if one is installed, this is an optional part of the mounting
Step 7
bracket). For more information, see the
Figure 8-1
Item
1
2
3
Cisco 1240 Connected Grid Router Hardware Installation Guide
8-2
Location Security Panel Installed
2
1 3
Description
Router door
Captive bolt
Security panel
"Install the Optional Security Panel" section on page
Chapter 8 Unmounting the Router
5-19.
OL-26223-04