Figure 25
Band Strap Kit Contents
1
Item
Description
1
Steel straps (2)
Strap Tool Kit
Use the tool in the Strap Tool Kit to attach the steel straps included in the band strap kit. Steel straps are required to
install the mounting plate on poles larger than 4.5 inches (11.4 cm) in diameter. See
Note:
The tool in the Strap Tool Kit is manufactured and supported by BAND-IT. For more information about the tool, see
www.band-it-idex.com.
Figure 26
Strap Tool Kit Contents
Item
Description
1
Strap tool
2
Strap tool documentation (not shown)
1
53
Band Strap Kit, page
52.