Chapter 6 Installing The Router; Before Installing; Prepare The Installation Site; Read The Safety Information - Cisco 1240 Hardware Installation Manual

Installing the Router
This chapter describes how to install the Cisco 1240 Connected Grid Router (CGR 1240 or router) and
includes the procedures for basic router installation and for optional installation steps. The procedures
you follow depend on your network environment and requirements. This chapter contains the following
sections:
•
•
•
•
•

Before Installing

Read this section and the
installation procedures in this chapter.
•

Prepare the Installation Site

The procedures in this chapter assume that you have prepared the installation site according to the
information in the

Read the Safety Information

Before performing any of the tasks in this chapter, read the safety warnings in this section and in the
"Installation Safety and Site Preparation"

Preventing Electrostatic Discharge Damage

Many of the components discussed in this chapter are sensitive to electrostatic discharge (ESD) damage,
which can occur when electronic cards or components are handled improperly, results in complete or
intermittent failures.
OL-26223-04
Before Installing, page 6-1
Related Information, page 6-2
Basic Hardware Installation, page 6-2
Additional Router Connections, page 6-12
Installing Modules and Antennas, page 6-23
"Installation Safety and Site Preparation"
"Installation Safety and Site Preparation"
C H A P T E R
chapter.
chapter.
Cisco 1240 Connected Grid Router Hardware Installation Guide
6
chapter before following any
6-1