Grounding Instructions; Grounding Hardware - Cisco 1240 Hardware Installation Manual

Grounding Instructions

Figure 5-22
Grounding Instructions
In all installations, after the router is mounted, you must properly ground the unit according to the
instructions in this section before connecting network and power cables as described in the
the Router" section on page
Warning This equipment must be externally grounded using a customer-supplied ground wire before power is
applied. Contact the appropriate electrical inspection authority or an electrician if you are uncertain
that suitable grounding is available. Statement 366
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074

Grounding Hardware

The router is shipped with a grounding kit, shown in
Cisco 1240 Connected Grid Router Hardware Installation Guide
5-26
Tilt Mounting Bracket for SD Card Slot Access
6-1.
Chapter 5
1
Figure 5-23.
Mounting the Router
"Installing
OL-26223-04