Cisco 1240 Hardware Installation Manual page 80

Mounting Instructions
Install the Router onto the Mounting Bracket
This section describes how to attach the router to the mounting bracket. The mounting bracket is
installed on the mounting plate (included in the Cisco pole mount kit), which is installed on a supported
pole type. For more information, see the
The instructions for the procedures in this section refer to the mounting bracket kit contents shown in
Figure 5-2
Refer to the
Note
optional security panel on the bracket.
Figure 5-13
Mounting Instructions
What You Need
•
•
To mount the router on the bracket, follow these steps and refer to
Assemble eight sets of bracket hardware (washer, split lock washer, and bolt) as shown in the
Step 1
Bracket Hardware" section on page
Attach one set of hinge bolt hardware to the mounting bracket connector shown in
Step 2
Cisco 1240 Connected Grid Router Hardware Installation Guide
5-16
and the bracket features described in
"Install the Optional Security Panel" section on page 5-19
Router Installed in Mounting Bracket
Mounting bracket and hardware included in the
Socket wrench that you supply.
"Pole Mount Kit" section on page 5-2
Figure 5-11.
"Mounting Bracket Kit" section on page
5-13.
Chapter 5 Mounting the Router
for details on how to install the
Figure 5-14 and Figure 5-15:
"Assemble
Figure 5-15
OL-26223-04
5-4.
( ).
1