Installing The Swingaway Padded Armrest Arm Sockets - Invacare ProSPIN X4 Owner's Manual

SECTION 8—ARMS

Installing the Swingaway Padded Armrest Arm Sockets

NOTE: For this procedure, refer to FIGURE 8.9.
1. Remove the two existing locknuts and mounting screws that secure back cane
mounting bracket to the back cane.
NOTE: Position arm socket towards outside of the wheelchair frame.
NOTE: When installing the arm socket, two, new, longer mounting bolts are used.
2. Using two new, long mounting screws and locknuts, secure the arm socket to the back
cane mounting bracket and back cane. Securely tighten.
3. Repeat STEPS 1‐2 for the opposite arm socket.
Arm Socket
Locknuts
FIGURE 8.9 Installing the Swingaway Padded Armrest Arm Sockets
ProSPIN™ X4™
Back Cane
Back Cane Mounting Bracket
Mounting Screws
54
Part No 1125104