Section 2-Safety Inspection; Inspection/Set-Up Checklist - Invacare ProSPIN X4 Owner's Manual

SECTION 2—SAFETY INSPECTION
SECTION 2—SAFETY INSPECTION
NOTE: Every six months and as necessary, take your wheelchair to a qualified technician for a
thorough inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance
the smooth operation of your wheelchair. To operate properly and safely, your wheelchair must be
cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of your
wheelchair.

Inspection/Set-up Checklist

Initial adjustments should be made to suit your personal body structure needs and
preference.
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
CAUTION
As with any vehicle, wheels and tires should be checked periodically for cracks and
wear and should be replaced.
❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑ Ensure all hardware is tight.
❑ Inspect bent or protruding metal on clothing guards.
❑ Ensure all fasteners on clothing guards are secure.
❑ Ensure arms are secure but easy to release and adjustment levers engage properly.
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure armrest pad sits flush against arm tube.
❑ Inspect seat and/or back upholstery for rips.
❑ Ensure back mounting plate attaching hardware is securely tightened.
❑ Ensure hand grips are not loose.
❑ Ensure sealed bearings and axle nut tension is correct.
❑ Inspect for excessive side movement or binding when rear wheels are lifted and spun.
❑ Ensure quick/quad‐release axles lock properly.
❑ Inspect handrims for signs of rough edges or peeling finish.
❑ Inspect for broken spokes.
❑ Ensure wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
18
ProSPIN™ X4™ Part No 1125104