SECTION 15—TRANSPORT READY OPTION
Vehicle-Anchored Belts
NOTE: For this procedure, refer to FIGURE 15.3.
This wheelchair has an overall rating of "B" with regard to accommodating the use and
fit of vehicle‐anchored belts. This rating is scored as follows:
The test for Lateral Stability Displacement for Point (P) is shown in FIGURE 15.3. The
average test result for point (P) is 0.77‐inches (19.6 mm).
Test
Platform
Seating System
This wheelchair has been tested for seating in a motor vehicle with the factory
installed seating system only.
When feasible, wheelchair occupants should transfer into the vehicle seat and use
the OEM (Original Equipment Manufacturer) vehicle-installed restraint system.
Ensure that the factory installed seating system is secured to the wheelchair frame before
operation. Refer to the seating system owner's manual.
ProSPIN™ X4™
RATING
A
B
C
D
Rear View
Point (P)
°
45
FIGURE 15.3 Vehicle-Anchored Belts
WARNING
DESCRIPTION
Excellent
Good
Fair
Poor
NOTE: Rear view of
wheelchair and human
surrogate secured on test
platform and tilted to 45
degrees.
100
Part No 1125104