Adjusting Armrest Height; Replacing Conventional Adjustable Height Armrest Arm Pad - Invacare ProSPIN X4 Owner's Manual

SECTION 8—ARMS

Adjusting Armrest Height

1. Lift the height adjustment lever up to the unlocked (vertical) position.
2. Adjust armrest to desired height.
3. Press the height adjustment lever down to the locked (horizontal) position.
Unlocked
Height Adjustment
(Vertical)
Lever
Rear Armrest
Front Armrest
Release Lever
Release Lever
Locked
(Horizontal)
Armrest Socket
Armrest Socket
FIGURE 8.1 Removing/Installing/Adjusting Conventional Adjustable Height Armrests
Replacing Conventional Adjustable Height Armrest
Arm Pad
NOTE: For this procedure, refer to FIGURE 8.2.
1. Remove the mounting screws that secure the arm pad to the armrest assembly.
2. Replace arm pad and securely tighten with the existing mounting screws.
3. Repeat STEPS 1‐2 for the opposite side if necessary.
Arm Pad
Armrest
Assembly
Mounting
Mounting Screw
Screw
FIGURE 8.2 Replacing Conventional Adjustable Height Armrest Arm Pad
48
ProSPIN™ X4™ Part No 1125104