QMS Magicolor WX User Manual page 93

The imageable region of each media size is smaller than the size of
the media. The imageable region is subject to hardware limits (physi-
cal page size and margins required by the print engine). As you set
page margins in your application, remember they must be equal to or
less than the imageable regions specified for the page size you're
using. "Print Media Sizes, Imageable Regions, and Margins" on page
2-51 lists measurements of imageable regions and margins for each
media size.
There are two imageable regions for legal-sized pages: one for black
and one for color. The imageable region for black on legal-sized
pages is 8.11" x 13.61" (205.90 mm x 345.60 mm). The imageable
region for color on legal-sized pages is an 8.11" x 11.7" (205.90 mm x
297.18 mm) region at the top of the page. We recommend that you
compose color legal-sized pages so that color images stay in this
8.11" x 11.7" area near the top of the page, and use the imageable
region below this for black only.
If you experience problems with your file being cut off (not printing to
the expected margins), it might be due to an imageable region con-
straint. To compensate for imageable region constraints, use a larger
page size or adjust margins, page size, or scale through your applica-
tion.