QMS Magicolor WX User Manual page 17

» Note: The illustrations accompanying the following procedures show
the printer sometimes from the front and sometimes from the rear,
depending on which view is best to show you the part we're installing
at the time. You don't need to turn the printer while performing these
procedures.
M WARNING! The developer and toner cartridge contain highly
combustible powders; they should not be disposed of by burning.
Also, avoid inhaling loose developer or toner or getting them around
your eyes; they can cause respiratory problems and eye irritation.
ACHTUNG! Bei Entwickler und Toner handelt es sich um gefährliche
Pulver, die leicht enzündlich sind; sie dürfen deshalb niemals mit
offenem Feuer in Beruhrüng kommen. Einatmen oder Berührung mit
Haut und Augen ist ebenfalls zu vermeiden, da dieses zu
Beeintràchtigungen der Atemwege, Haut oder Augenreizungen
führen könnte.
Caution: It's important to load the developer and toner cartridges in
the correct place, exactly as described.
1 Find the black-developer cartridge and remove it from its
protective bag.
Developer cartridges have green handles and a small strip of
plastic on top that indicates their color.
» Note: Store all of the packing materials where you can easily
access them if you ever need to relocate the printer or return it for
service.