QMS Magicolor WX User Manual page 50

Dithering, a technique for placing dots, allows the printer to create
halftones, in which areas of print appear to contain many different val-
ues and densities and thus simulate a full range of colors.
Purpose
Choices
Default
Notes
Intensity specifies how light or dark to print the graphics in your docu-
ment.
Purpose
Range
Default
The Color... button displays the Graphics—Color window. See the fol-
lowing section, "Configuring Color Options," for more information.
» Note: The Color... button is available only if QMS magicolor WX Color
is the selected printer driver.
Sets the dither pattern.
None—No dithering
Fine—For printing at resolutions less than 300 dpi (not
recommended for this printer)
Coarse—For printing text and most graphics at 300 or 600 dpi
Error Diffusion—For printing photographs or pictures that
don't have sharp, well-defined edges at 300 or 600 dpi
Line Art—For printing monochrome graphics with clearly
defined lines
Coarse
Line Art is available only if QMS magicolor WX Monochrome is
the selected printer type. Otherwise, it is grayed out.
Sets the degree of lightness/darkness at which graphics are
printed.
0 (darkest)–200 (lightest)
100