QMS Magicolor WX User Manual page 64

Choices 600 dots per inch Color—For printing color documents at
600x600 dpi
Default 600 dots per inch Color
Branch Graphic
Purpose Selects between gray scale and color printing.
Choices Gray Scale—Print in black and white only
Color—Print in color
Default Color
See "Configuring Halftone Color Adjustments" on page 2-26.
Branch Document Options
Purpose Sets the type of media to be printed.
Choices Standard—For printing on normal weight paper, envelopes,
and labels
Thick Stock—For printing on 24–43 lb (90–163 g/m
Transparency—For printing on overhead transparency film
Default Standard
Notes Your media choice must be set through the printer driver. (The
Media key on the printer control panel is not used. It is
available to allow you to upgrade your printer to a fully
networkable, departmental color printer, the QMS magicolor
CX Print System. Contact your QMS vendor for specifications
and purchase information.)
Do not select Transparency when printing on regular paper.
This may waste ink and cause smearing.
2
) stock