QMS Magicolor WX User Manual page 165

16 Locate the two manual-feed belts at the top of the cassette
slot.
17 Use the damp cloth to wipe the belts.
Advance the belts so that the entire surface is cleaned.
18 Reach into the back of the cassette slot and locate the paper-
feed roller.
It's on the top of the slot at the rear.
19 Use the damp cloth the wipe the roller.
Rotate the roller so that the entire surface is cleaned.
20 Slide the manual-feed platform back into place.
Push it back into the printer until it is secure.
21 Replace the media cassette.
» Note: If you have the optional 250-sheet feeder installed, perform
the same procedure for that cassette.
22 Make sure the green handle on the end of the OPC belt car-
tridge is turned up (unlocked).