Install The Printer Driver - QMS Magicolor WX User Manual

4 From the File menu choose Delete.
If it's installed, select the QMS magicolor WX Monochrome
5
printer driver in the Printers window.
6 From the File menu choose Delete.
7 Shut down your PC in the usual way.
8 Turn on the main power switch on the back of the printer, and
then turn on the power switch at the front of the printer
(press in the button).
» Note: There are two power switches on your printer, a main
switch on the back and a remote switch (for convenience) on the
front. Only one switch has to be off to turn off the printer, but both
switches must be on to turn on the printer.
The printer goes through an initialization warm-up and self-testing
that lasts about 4.5 minutes. When warm-up is complete, IDLE
displays in the message window.
9 Turn on the PC.
10 A message window will inform you New Hardware Found,
and then you'll be prompted to insert the QMS magicolor WX
printer driver disk.
11 Insert the QMS magicolor WX printer driver disk in the PC's
3.5" disk drive, and choose OK to continue.
12 Follow the instructions on the screen to install the printer
driver.
After installation, the Windows 95 desktop appears.
'