QMS Magicolor WX User Manual page 234

n
The cable must have an overall braided shield, Belden 8345 or
equivalent.
n
Connectors must have shielded housings. The overall shield must
be bonded to the shielded housings at both ends of the cable.
The QMS magicolor WX Print System is
Energy Star compliant.
» Note: The EPA, as a matter of policy,
does not endorse any particular
company or its products.
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to
correct the interference at his own expense.
» Note: To comply with Part 15 of FCC rules, shielded interface cables
must be used.
'