QMS Magicolor WX User Manual page 181

Caution: QMS cannot be held responsible for damage to your printer
during shipment that results from the improper packaging of your
printer. You must use the instructions given in this document to
remove the toner cartridges, developer cartridges, and oil bottle; drain
the fuser unit; replace the pressure-release pieces; remove the OPC
belt cartridge; and change the waste toner pack before repacking the
printer in its original shipping box with the original packing materials.
If you need replacement packaging, in the US call QMS National
Service at 1 (334) 633-4300 x 2530. If you need to return the printer
for service, in the US call QMS Customer Service at 1 (334) 633-1072
for an RMA (Return Merchandise Authorization) number before
shipping the printer. In other countries, refer to appendix A, "QMS
Customer Support."
1 If you have a sheet
feeder, remove it from
the printer. Otherwise,
skip to step 2.
a Remove the plastic
brackets from the
corners of the
sheet feeder.