QMS Magicolor WX User Manual page 35

3 Load the paper (printing-side up) in the cassette.
Note: For the best quality printouts, before you load paper in the
»
cassette, look at the paper packaging to determine which is the
printing side of the paper (an arrow points in the direction of the
printing side on most packaging). Also, you should fan the paper
(to prevent the sheets from sticking together).
For letterhead or preprinted media load the top-end first. Make
sure the paper lies flat and does not exceed the upper-limit mark
on the cassette for paper. Overloading the cassette can cause a
jam.
4 Adjust the paper guides on each side and on the trailing
edge of the paper so that they rest lightly against the paper
without causing it to buckle.
5 Slide the filled cassette into the printer until it snaps firmly
into place and is flush with the front of the printer.
Paper
Foil