Replacing A Toner Cartridge - QMS Magicolor WX User Manual

3 Does your application require any additional printer setup
steps?
If you're experiencing printing problems not related to print quality,
check the printing section of your application documentation to
see if any additional printer setup steps are required.
Make sure that any newly installed toner and developer cartridges are
properly installed, with the sealing tapes removed. Review the steps
in "Replacing a Toner Cartridge" and "Replacing a Developer Car-
tridge" in chapter 5, "Maintenance."
n
Check the imageable regions for the size media you're using (see
chapter 2, "Printing"). Are you trying to print outside of the image-
able region of the page? If so, change to a larger size media, or
adjust the margin(s) through your application.
n
The charger unit or various roller and plates may be dirty. See
chapter 5, "Maintenance," for instructions on how to clean these
parts.
n
Check for a Need More Memory error message in the message
window. The job may have been too complex for the amount of
memory currently installed in the printer. You have three options:
- Change to Coarse dither in the printer driver
- Print at 300 dpi
- Add more memory