QMS Magicolor WX User Manual page 60

The OK button allows you to save your changes and exit from the
Document Properties window.
The Cancel button allows you to cancel your changes and exit from
the Document Properties window.
The Advanced tab allows you to provide information about resolution,
halftone color adjustment, media, and metafile spooling in addition to
the page setup options discussed in "Configuring Page Setup
Options" on page 2-16.
On the Advanced tab, the options are listed in tree form on three
branches: Paper/Output, Graphic, and Document Options.
n
Under the Paper/Output branch, Paper Size, Orientation, Paper
Source, and Copy Count are listed.
n
Under the Graphic branch, Resolution and Color Appearance are
listed.
n
Under the Document Options branch, Halftone Color Adjustment,
Media, and Metafile Spooling are listed.
Beside each option is a word or phrase in angle brackets. This is the
option setting. For example, <Letter> is beside Paper Size—Paper
size is the option and <Letter> is the option setting.
To change an option setting, select an option. Under the options, a
group of selections for that option will display. Just click a selection to
display it inside the angle brackets beside the option.
Each option is explained in detail in this section.
Note: The Page Setup and Advanced tabs display on both the QMS
»
magicolor WX Default Document Properties and the QMS magicolor
WX Document Properties dialog boxes. Since the tabs display the
same in either box, only one box is shown in full in the following
illustration.