QMS Magicolor WX User Manual page 111

4 Snap the plastic brackets onto the appropriate corners of the
sheet feeder.
The inside corner of each bracket is labeled to indicate which cor-
ner of the sheet feeder it fits in. These brackets also have small
rims on the bottom that fit inside the edges of the sheet feeder.
The sheet feeder is now installed. See chapter 2, "Printing," for infor-
mation on handling media and filling cassettes.
Note: If you move the printer with the sheet feeder attached, lift the
»
unit by the four bottom corners, not by the sheet feeder's cassette
slot.