Setting The Hv Adjust Values - Ricoh EMP 156 User Manual

Setting the HV Adjust Values

The HV adjust feature is used when it is necessary to shift the image on the printed
± ±
page. You can shift the image 0.25 in. ( 6.3 mm). When printing in duplex mode,
you can set different HV adjust values for the front side and back side of the paper.
1. To display the HV Adjust screen, make the following selections from the OCP:
Printer / Paper Source / HV Adjust
Figure 3-23. Setting the HV Adjust Value (1)
2.On the Tray Adjust screen, choose Front or Back and select the unit of adjust
value.
Paper Face
Unit of Value
Figure 3-24. Setting the HV Adjust Values
3. Touch the vertical position value box. The HV Adjust input screen is displayed.
Vertical Position Value Box
Figure 3-25. Setting the HV Adjust Values (3)
Paper Handling 3-21