Customizing Specific; Customizing Dashboards; Enabling The Map Data Fields; Changing The Data Fields - Garmin Rino 600 Series Owner's Manual

Customizing Your Device
2. Select a profile.
3. Select Delete.

Customizing Specific

Pages
You can customize the data and
dashboards of the map, compass, trip
computer, and elevation plot.

Enabling the Map Data Fields

By default, the map does not show data
fields. You must enable the data fields
before you can edit them.
1. Select Setup > Map > Data Fields.
2. Select the number of data fields to
display.

Changing the Data Fields

Before you can change the map fields,
you must enable them
1. Open the page for which you will
change the data fields.
2. Select a data field to customize.
26
(page 26).
3. Select a data field type.
For data field descriptions, see
page 44.
about Dashboards
Each dashboard shows different
information about your route or your
location.

Customizing Dashboards

1. Open the page for which you want
to customize the dashboard.
2. Select an option:
• For the trip computer and
compass, select .
• For the map, select Setup >
Map.
3. Select a dashboard.

System Settings

Select Setup > System.
• GPS—sets the GPS to normal,
WAAS/eGnoS (Wide Area
Rino 600 Series Owner's Manual