Table 138 Configuration items
Item
ACL Number
Match Order
Description
Configuring a rule for a basic IPv4 ACL
1.
Select QoS > ACL IPv4 from the navigation tree.
2.
Click the Basic Setup tab.
The rule configuration page for a basic IPv4 ACL appears.
Figure 447 Configuring a basic IPv4 ACL
3.
Configure a rule for a basic IPv4 ACL.
4.
Click Add.
Description
Set the number of the IPv4 ACL.
Set the match order of the ACL. Available values are:
•
Config—Packets are compared against ACL rules in the order that the rules are
configured.
•
Auto—Packets are compared against ACL rules in the depth-first match order.
Set the description for the ACL.
455