Configuring Basic Mld Snooping Features; Enabling Mld Snooping - HP FlexFabric 5700 Series Configuration Manual

Tasks at a glance
Configuring MLD snooping
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
The MLD snooping configurations made on Layer 2 aggregate interfaces do not interfere with the
configurations made on member ports. In addition, the configurations made on Layer 2 aggregate
interfaces do not take part in aggregation calculations. The configuration made on a member port of the
aggregate group takes effect after the port leaves the aggregate group.

Configuring basic MLD snooping features

Before you configure basic MLD snooping features, complete the following tasks:
Configure the associated VLANs.
•
• Determine the MLD snooping version.
Determine the MLD last listener query interval.
•
Determine the maximum response time for MLD general queries.
•

Enabling MLD snooping

When you enable MLD snooping, follow these guidelines:
You must enable MLD snooping globally before you can enable it for a VLAN.
•
• MLD snooping for a VLAN works only on the member ports in that VLAN.
You can enable MLD snooping for a VLAN in MLD-snooping view or in VLAN view. These configurations
have the same priority level.
To enable MLD snooping for a VLAN in MLD-snooping view:
Step
1. Enter system view.
2. Enable MLD snooping
globally and enter
MLD-snooping view.
3. Enable MLD snooping for the
specified VLANs.
To enable MLD snooping for a VLAN in VLAN view:
Step
1. Enter system view.
policies:
Configuring an IPv6 multicast group policy
Configuring IPv6 multicast source port filtering
Enabling dropping unknown IPv6 multicast data
Enabling MLD report suppression
Setting the maximum number of IPv6 multicast groups on a port
Enabling the IPv6 multicast group replacement feature
Command
system-view
mld-snooping
enable vlan vlan-list
Command
system-view
64
Remarks
N/A
By default, MLD snooping is
globally disabled.
By default, MLD snooping is
disabled for a VLAN.
Remarks
N/A