Command Line Reference; Command Sets - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual

The ProSafe 802.11g Wireless Access Point (AP) can be configured either through the command
line interface (CLI), a Web browser, or an MIB browser. The CLI allows viewing and modification
of the configuration from a terminal or PC through a Telnet connection.

Command Sets

get set del keyword
--- --- --- ---------------------- -------------------------------
[X] [X] time
[X] |-now
[X] [X] |-zone
[X] [X] `-daylight saving
[X] [X] system
[X] |-version
[X] [X] |-apname
[X] |-macaddr
[X] [X] |-country
[X] [X] |-dhcpclient
[X] [X] |-ipaddr
[X] [X] |-netmask
[X] [X] |-gateway
[X] [X] |-dns
[X] [X] | |-primary
[X] [X] | `-secondary
[X] [X] |-stp
[X] [X] |-vlan
[X] [X] | |-mode
[X] | `-manage id
[X] `-ethstats
[X] [X] dhcp server
[X] [X] |-dhcpserver
[X] [X] |-anyip
[X] [X] |-ipstart
[X] [X] |-ipend
[X] [X] |-netmask

Command Line Reference

Command Line Reference
Description
--time setting
--current system time
--time zone
--daylight saving
--system setting
--system firmware version
--system name
--system MAC address
--country/region
--system dhcp client
--system IP address
--system network mask
--system gateway
--system dns
--primary system DNS server
--secondary system DNS server
--enable spanning tree protocol
--system vlan
--on/off vlan function
--vlan management id
--ethernet statistics
--DHCP server
--enable DHCP server
--accept static IP (AnyIP function)
--starting IP address
--ending IP address
--network mask
v4.0, April 2006
Appendix C
C-1