Pass; Figure 37 Password Setup - Fluke 917X Series Technical Manual

917X Series Metrology Wells
Main Menu
5.2.4.3

Pass

Figure 37 PASSWORD SETUP

The Pass (PASSWORD SETUP) menu is used to set the system password or enable or
disable protection of certain groups of system parameters.
If a user enters the wrong password, a message will display on the screen that indi-
cates the wrong password has been entered. The parameter window associated with
that password and current menu will still display, but with view capability only. This
means that any user can verify proper settings, but only users with the correct pass-
word can edit critical parameters.
SYSTEM PASSWORD
The SYSTEM PASSWORD parameter is the password used to access protected
menus. The System Password is a number between one and four digits. Each digit of
the password can be a number from 0 to 9. The default System Password is "1234". If
desired, the System Password can be changed in this menu by using the numeric keys
to enter the new password and pressing "ENTER".
SETPOINT PROT
The SETPOINT PROT parameter is used to enable or disable password protection for
the set-point.
CUTOUT PROT
The CUTOUT PROT parameter is used to enable or disable password protection for
the cutout.
60