Fluke 917X Series Technical Manual page 94

917X Series Metrology Wells
Serial Commands - Alphabetic Listing
SYST:COMM:SER:FDUP[?] [0|1]
Read or set serial interface echo enable, on (1) or off (0)
Read Example: SYST:COMM:SER:FDUP?
Response: 0
Set Example: SYST:COMM:SER:FDUP 1
This command enables or disables echo.
SYST:COMM:SER:FEED[?] [0|1]
Read or set serial interface auto-printing enable, on (1) or off (0)
Read Example: SYST:COMM:SER:FEED?
Response: 1
Set Example: SYST:COMM:SER:FEED 0
This command enables or disables auto printing to the serial port.
SYST:COMM:SER:LIN[?] [0|1]
Read or set serial interface linefeed enable, on (1) or off (0)
Read Example: SYST:COMM:SER:LIN?
Response: 0
Set Example: SYST:COMM:SER:LIN 1
This command enables or disables line feed.
SYST:COMM:SER:TIM[?] [n]
Read or set serial interface auto-printing interval
Read Example: SYST:COMM:SER:TIM?
Response: 3
Set Example: SYST:COMM:SER:TIM 5
This command sets the interval to print to the serial port.
SYST:DEC:FORM[?] [0|1]
Read or set the decimal format (period (0), comma (1))
Read Example: SYST:DEC:FORM?
Response: 0
Set Example: SYST:DEC:FORM 1
86