Chapter 5 Parts List - TallyGenicom 9045N Service Manual

Duplex Option
Description of procedure
[RRP X.Y "AAAAA"] attached at the front of the procedure shows that the name of parts to be
assembled/disassembled is "AAAAA".
"(PL X.Y.Z)" attached at the end of parts name in the procedure shows that the parts corresponds
to the plate (PL) "X.Y", item "Z" of [Chapter 5 Parts list], and their shape and fitting position can be
checked in [Chapter 5 parts list].
The printer orientation used in the procedures is defined as follows:
- Front
- Rear
- Left
- Right
LEFT
FRONT
The screws in procedures are expressed with their replacing position, color, characteristics and
nominal length, etc.
In case of _____ specifications" in the procedures indicate that service operation should be
provided only to Duplex Option of specified specifications (service operation should not be pro-
vided for Duplex Option of specifications not covered).
"RRP X.Y" in the midst or at the end of sentences in the procedures indicate that work procedures
related with the "RRP X.Y" are described.
"Figure X.Y" at the end of the sentences of procedures indicate that illustrations instructive for the
"RRP X.Y" are included.
"Z)" in the illustrations correspond to "Z)" of the service procedures.
The screws in the illustrations should be removed using a plus (+) screwdriver unless otherwise
specified.
A black arrow in the illustrations indicate movement in the arrow mark direction.
Numbered black arrows indicate movement in the order of the numbers.
White arrows (FRONT) in the illustrations indicate the front direction.
For the positions of the connectors (P/J), refer to Chapter 7, Electric wiring.
: Front direction when facing the front of device.
: Rear direction when facing the front of device.
: Left direction when facing the front of device.
: Right direction when facing the front of device.
Chapter 3 Removal and Replacement Procedures (RRPs)
1 - 162
REAR
RIGHT
J23619AA