Rrp10.3 Hsg Lower Dup (Pl10.1) - TallyGenicom 9045N Service Manual

RRP10.3 HSG LOWER DUP (PL10.1)

Removal
1) Remove the COVER LEFT (PL 10.1). (RRP10.9)
2) Remove the COVER RIGHT (PL 10.1). (RRP10.10)
3) Disconnect the connector (P/J50) of the HARNESS ASSY DUP (PL 10.1) from the PWBA
DUPLEX (PL 10.1).
4) Remove the screw (silver, 6mm) securing the HARNESS ASSY DUP EARTH (PL 10.1).
5) Release the HARNESS ASSY DUP from the harness clamp.
6) Remove the SCREW TAPPING (PL 10.1) securing the SPRING DUMPER (PL 10.1).
7) Remove the 2 SCREW HINGEs (PL 10.1) securing the HSG LOWER DUP, and remove the
HSG LOWER DUP from the COVER HSG DUP (PL 10.1).
SCREW TAPPING
(PL21.1.40)
SPRING DAMPER
(PL21.1.39)
Chapter 3 Removal and Replacement Procedures (RRPs)
SCREW HINGE
(PL21.1.11)
COVER HSG DUP
(PL21.1.18)
PWBA DUPLEX
(PL21.1.32)
1 - 166
HSG LOWER DUP
(PL21.1.6)
SCREW HINGE
(PL21.1.11)
HARNESS ASSY
DUP (PL21.1.7)
HARNESS ASSY DUP EARTH
(PL21.1.28)
J23614A