Test Print; Default Tray; Duplex - TallyGenicom 9045N Service Manual

9. Test Print

The Test Print Menu enables the running of five test prints, selecting the tray for the source paper, and
selecting duplex or simplex.
With "Test Print" displayed on the LCD, pressing the " " button will enter the Test print menu and dis-
play the first menu selection.

9.1 Default Tray

With Test Print displayed on the LCD, pressing the " " button will display the current default tray. The
default tray is the tray that will be used to print any of the test pages below. The tray choices for this
menu are:
Tray 1
Tray 2
Tray 3
Tray 4
Use the " " or " " buttons to scroll through the choices. With the desired tray displayed, press " " to
save your choice and return to the Test Print menu.

9.2 Duplex

With "Duplex" displayed on the LCD, pressing the " " button will enter the duplex menu and display the
current setting. If duplex is set to ON, all test prints will print on both sides. If duplex is set to OFF, all
test prints will be printed in the simplex mode.
The choices for this menu are ON and OFF. se the "
With the desired choice displayed, press " " to save your choice and return to the Test Print Menu.
" or " " buttons to toggle between ON and OFF.
2 - 11
Chapter 2 Diagnostics