Fip- 1.P12 Skew - TallyGenicom 9045N Service Manual

FIP- 1.P12 Skew

Before commencing troubleshooting, check the paper transfer course. Make sure there is no foreign
articles on the transfer course, such as staples, paper clips, scraps of paper and so on.
Step
Checking the installation place
Check if there is any irregularity on the installation
1 place.
Check if there is any missing Foot.
Is the setup surface normal?
Checking the paper feeding
Remove the Paper Cassette.
Insert the paper to the Paper Cassette correctly.
Install the Paper Cassette to the printer.
2
Install PLATE ASSY BTM correctly. (not to incline right
or left) (RRP2.5 and 4.5)
Re-print the problem image.
Does the problem still occur?
Check the paper transfer course.
Check if there are any stains or obstacles on the paper
3 transfer course between the paper feeding tray and the
exit tray.
Are there any obstacles on the paper transfer course?
Checking the rolls on the paper transfer course
Check all the rolls on the course, where the paper
transfer between paper feeding entrance tray and exit
tray, and check if there are any stains, wear or dam-
4 ages.
Check if the pinch roll rotates freely, and the spring
pressure is even.
Are there any stains, wear or damages on the rolls in
the paper transfer course?
Checking EP CARTRIDGE
5 Install a new EP CARTRIDGE.
Re-print the problem image. Is the image still skew?
Print defect
The printed image is not paralleled with both sides of the
paper.
ESS and possible causes
- EP CARTRIDGE
- BTR ASSY (PL8.1.21)
- 150 FEEDER ASSY (PL5.1.1)
- FUSER ASSY (PL8.1.20)
- Paper Cassette
- PLATE ASSY BTM (PL2.1.10, PL4.1.10)
- 150 Paper Feeder
- Option 550 Paper Feeder
- PWBA ESS (PL12.1.13)
- 550 FEEDER ASSY (PL7.1.10)
Check
1 – 130
Chapter 1 Troubleshooting
Yes
Arrange the instal-
Go to step 2. lation place nor-
Go to step 3. End of work
Remove the obsta-
cles or stains from
Go to step 4.
the paper transfer
Replace the dam-
aged or worn-out
Go to step 5. rolls. (Refer to cor-
responding RRPs,
for replacement.)
Go to step [ESS
and possible End of work
causes].
No
mally.
course.