Installing Software; Chapter 3 Installing Software; Driver Installation - TallyGenicom 9045N Quick Start Manual

Chapter 3

Installing Software

Driver Installation

1 Load the cd into the drive.
2 After it loads select
to the License Agreement on the opening
I Accept
screen.
3 Read carefully the instruction about the USB connection.
4 Follow the instructions on the screen.
For plug and play using usb or parallel interface it is recommended to follow the wizard and just
install the driver.Then power the printer on so that the system can find the printer and install the
correct driver.
Once the driver is installed ensure any additional options present are installed via the device op-
tions tab.
23