Fip1.17 Fuser Life - TallyGenicom 9045N Service Manual

Chapter 1 Troubleshooting

FIP1.17 Fuser Life

Step Check Yes No
Possible causes:
FUSER ASSY (PL8.1.20)
HARNESS ASSY FUSER (PL8.1.17)
HVPS/MCU (PL12.1.19)
Checking FUSER ASSY
Does Error still occur, after installing a new FUSER
ASSY and sending RESET FUSER LIFE WARNING
Replace HVPS/
command?
1 MCU. End of work
Checks by sending RESET FUSER LIFE WARNING
(RRP12.10)
Command from Controller section to MCU section of
HVPS/MCU, using Chapter 2 Diagnostic [FUSER
WARNING COUNT RESET].
1 – 32