FIP1.11 EP Cartridge
Step
Possible causes:
HVPS/MCU (PL12.1.19)
EP CARTRIDGE
GUIDE ASSY CRU R (PL8.1.25)
Checking EP CARTRIDGE (1)
1
Is the EP CARTRIDGE appropriate model?
Remove the EP CARTRIDGE to check the model.
Checking EP CARTRIDGE (2)
Install the EP CARTRIDGE again.
2
Does STATUS 1-6 occur again when the power is
turned ON?
Checking GUIDE ASSY CRU R
3
Remove GUIDE ASSY CRU R. (RRP8.13)
Is each harness continuous?
Checking EP CARTRIDGE (3)
4
Replace the EP CARTRIDGE.
Does Error occur again when the power is turned ON?
Check
1 – 26
Chapter 1 Troubleshooting
Yes
Replace EP CAR-
Go to step 2.
Go to step 3.
End of work
Replace GUIDE
Go to step 4.
ASSY CRU R.
(RRP8.13)
Replace HVPS/
MCU.
End of work
(RRP12.10)
No
TRIDGE.