Oct Option; Error/Status Code List - TallyGenicom 9045N Service Manual

4.7 Error/Status Code List

Status Code Error Contents
STATUS 3-1 JS0
STATUS 3-2 JS1
STATUS 3-3 JS2
STATUS 3-4 JS3
STATUS 3-5 JS4
STATUS 16-5 Full Stack (OCT)
STATUS 17-2 OCT Cover Open
STATUS 17-5 OCT Unit Fail
STATUS 21-1 Illegal Size (Duplex/OCT)
Table 1-1
JS4 JS3 JS2 JS1
0 1 1
1 0 1

OCT Option

STATUS 3-1 to 3-5 indicates JAM by combina-
tion of Table 1-1.
-Option OCT became Full Stack.
- Cover of Option OCT is open.
- Option OCT is not installed when OCT mode
is selected.
- Paper size that is not supported in Duplex or
OCT mode is selected.
JS0 Contents of Jam
0 1 OCT Jam 1
0 1 OCT Jam 2
Error Description
Error Description
Paper Jam/Exit to OCT - When the
paper did not reach to OCT Sensor
from Exit Sensor within the specified
time.
Paper Jam/OCT -When the paper was
not fed to OCT Sensor within the speci-
fied time. - When OCT Sensor turned
ON in warming up.
1 – 81
Chapter 1 Troubleshooting
FIP to be
referred
FIP3.6
FIP3.1
FIP3.2
FIP3.7
FIP2.6
FIP3.5
FIP to
be
referred
FIP3.3
FIP3.4