Rrp2.5 Plate Assembly Btm (Pl 2.1) - TallyGenicom 9045N Service Manual

RRP2.5 PLATE ASSEMBLY BTM (PL 2.1)
Removal
1) Remove the COVER CST (PL 2.1) from the 150 PAPER CASSETTE (Figure 1).
2) Release the lock of the LOCK EXTENSION, and pull out the cassette extension as far as it will go
(Figure 1).
3) Release the hooks securing the GEAR PINION (PL 2.1) to the HOUSING TOP 150 (PL 2.1), and
remove the GEAR PINION.
4) While pressing down the lock of the STOPPER GEAR (PL 2.1), release the lock of the LEVER
BTM LOCK (PL 2.1) to lift up the PLATE ASSEMBLY BTM (PL 2.1).
5) Slide the GUIDE ASSEMBLY SD L150 (PL 2.1) inward, and remove it from the HOUSING TOP
150 by pressing down the hook of the HOUSING TOP 150.
6) Slide the GUIDE ASSEMBLY SD R150 (PL 2.1) inward, and remove it from the HOUSING TOP
150 by pressing down the hook of the HOUSING TOP 150.
GUIDE ASSY SD R150
(PL2.1.13)
HOOK
WHEN ASSEMBLING
CLAW
GUIDE ASSY SD L150
Chapter 3 Removal and Replacement Procedures (RRPs)
GEAR PINION
HOOKS
(PL2.1.12)
HOUSING TOP150
Figure 1. Plate Assembly BTM
1 - 23
GUIDE ASSY SD L150
(PL2.1.11)
CLAWS
HOOK
LEVER BTM LOCK
(PL2.1.26)
STOPPER GEAR
(PL2.1.28)
JG3012AA