Rrp9.8 Shield Assembly Window (Pl 9.1) - TallyGenicom 9045N Service Manual

RRP9.8 SHIELD ASSEMBLY WINDOW (PL 9.1)
Removal
1) Remove the COVER RIGHT (PL 1.1) (RRP1.2).
2) Remove the 2 screws securing the SHIELD ASSEMBLY WINDOW to the frame (Figure 1).
3) Remove the SHIELD ASSEMBLY WINDOW.
Replacement
1) Install the SHIELD ASSEMBLY WINDOW to the frame using the 2 screws (Figure 1).
2) Install the COVER RIGHT (PL 1.1) (RRP1.2).
Chapter 3 Removal and Replacement Procedures (RRPs)
Figure 1. Window Shield Assembly
1 - 158