Figure 27 Removing Knobs; Figure 28 Removing The Bezel - Agilent Technologies InfiniiVision 7000 Series Service Manual

5 Replacing Assemblies
94
3 Carefully remove knobs from front panel. They may be
gently pried loose with a flat head screw driver taking
care not to scratch the faceplate, then pulled straight off.
Removing knobs
Figure 27
4 Remove bezel from front deck. Bezel is secured to front
deck by molded- in retaining clips located around the
perimeter of the bezel. Gently pry these outward (either
by hand or using a flat head screwdriver). Working your
way around the bezel releasing the clips gently lift the
bezel away from the front deck.
Removing the bezel
Figure 28
7000 Series Oscilloscopes Service Guide