Environmental Conditions - Agilent Technologies InfiniiVision 7000 Series Service Manual

Environmental Conditions

7000 Series Oscilloscopes Service Guide
Environment
Indoor use only.
Ambient temperature
non- operating –40 °C to +70 °C
Humidity
Operating 95% RH at 40 °C for 24 hr;
non- operating 90% RH at 65 °C for 24 hr
Altitude
Operating to 4,570 m (15,000 ft); non- operating to
15,244 m (50,000 ft)
Overvoltage Category
by MAINS that comply to Overvoltage Category II, which is
typical of cord- and- plug connected equipment.
Pollution Degree
The InfiniiVision 7000 Series Oscilloscope
may be operated in environments of Pollution Degree 2 (or
Pollution Degree 1).
Pollution Degree Definitions
or only dry, non- conductive pollution occurs. The pollution
has no influence. Example: A clean room or climate
controlled office environment.
Pollution Degree 2. Normally only dry non- conductive
pollution occurs. Occasionally a temporary conductivity
caused by condensation may occur. Example: General indoor
environment.
Pollution Degree 3: Conductive pollution occurs, or dry,
non- conductive pollution occurs which becomes conductive
due to condensation which is expected. Example: Sheltered
outdoor environment.
Characteristics and Specifications
Operating 0 °C to +55 °C;
This product is intended to be powered
Pollution Degree 1: No pollution
1
17