Fluke Met/Cal Procedures; Conventions; Table 2 Conventions - Agilent Technologies InfiniiVision 7000 Series Service Manual

Fluke MET/CAL Procedures

Conventions

7000 Series Oscilloscopes Service Guide
Fluke MET/CAL procedures are available for the 7000 Series
oscilloscopes.
The MET/CAL badge with "PROCEDURES AVAILABLE"
signifies that Fluke has created Warranted MET/CAL
procedures to verify the performance of this instrument
using MET/CAL metrology software. These procedures can be
obtained from Fluke. Please see http://www.fluke.com and
search for MET/CAL for more information.
The following conventions will be used when referring to
oscilloscope models throughout this chapter.
Conventions
Table 2
Models
MSO/DSO7012A/B, MSO/DSO7014A/B
MSO/DSO7032A/B, MSO/DSO7034A/B
MSO/DSO7052A/B, MSO/DSO7054A/B
MSO/DSO7104A/B
Testing Performance
Referred to as:
100 MHz Models
350 MHz Models
500 MHz Models
1 GHz Models
2
25