Exchange Assemblies - Agilent Technologies InfiniiVision 7000 Series Service Manual

Replaceable Parts 6
In order for Agilent Technologies to provide these
advantages, please send a check or money order with each
order.
Mail order forms and specific ordering information are
available through your local Agilent Technologies Sales
Office. Addresses and telephone numbers are located in a
separate document shipped with the manuals.

Exchange Assemblies

Some parts used in this instrument have been set up for an
exchange program. This program allows the customer to
exchange a faulty assembly with one that has been repaired,
calibrated, and performance- verified by the factory. The cost
is significantly less than that of a new part. The exchange
parts have a part number in the form XXXXX- 695XX.
After receiving the repaired exchange part from Agilent
Technologies, a United States customer has 30 days to return
the faulty assembly. For orders not originating in the United
States, contact the local Agilent Technologies service
organization. If the faulty assembly is not returned within 30
days, the customer will be charged an additional amount.
The additional amount will be the difference in price
between a new assembly and that of an exchange assembly.
7000 Series Oscilloscopes Service Guide 107