To Remove The Front Panel Assembly; Figure 25 Removing Cable Shield; Figure 26 Removing Keyboard Cables - Agilent Technologies InfiniiVision 7000 Series Service Manual

To remove the Front Panel assembly

WA R N I N G
7000 Series Oscilloscopes Service Guide
1 Remove cable shield from front deck. Carefully squeeze
the shield so that it clears the sheet metal tabs holding it
place then slide it free of the front deck:
Thin sheet metal parts may have sharp edges. Handle with care to avoid injury.
Removing cable shield
Figure 25
2 Remove keyboard cables that extend thru front deck.
Removing keyboard cables
Figure 26
Replacing Assemblies 5
93