Speed Dialing - Comdial GCA70-239 User Manual

GCA 70-239
Station User's Guide
l
To send a hookflash signal over the outside line during a call,
1. press and release hookswitch (flash), or press TAP if
available,
2. listen for intercom dial tone,
3. dial # 04,
4. listen for host system reply.
Speed Dialing
l
With intercom as prime line,
NOTE: The installer must configure your station with idle line pref-
erence for this feature to work properly since the last line used
could be busy and therefore not be available for use when
needed.
1. lift handset and listen for intercom dial tone,
2. press and release hookswitch (flash), or press TAP button i
available (dial tone will stop),
3. dial 0 - 1 for station speed dial,
4. dial +K 01 - +I+ 99 for system speed dial,
5. hang up handset to end call.
l
With outside line as prime line or idle line preference:
1. lift handset and listen for outside line dial tone,
2. press and release hookswitch (flash), or press TAP button if
available,
3. listen for intercom dial tone,
4. press and release hookswitch (flash), or press TAP button if
available (dial tone will stop),
5. dial 0 - 1 for station speed dial.
6. dial t 01 - S 99 for system speed dial,
7. hang up handset to end call.
IST Station User's Guide - 5