Table of Contents
Advertisement
1.3 Setting, Changing and Clearing Your Password
The VPS provides the option of assigning a password to your mailbox to protect the
messages stored there from unauthorized access. A password should be no longer than
10 digits (using the keys 0-9). You can change your password at any time. When setting
your password, avoid using obvious number combinations. If you forget your password,
have your System Administrator or System Manager clear it. You may then set a new one.
Subscriber's
Main Menu
Log into your mailbox.
FOR THE FIRST TIME
+
Password
Enter the password
and press #.
2
Press 2.
1.4 Recording Your Name
The recording of your name informs callers that they have reached the correct mailbox
(for example, when transferring a message to a subscriber, they will hear the
subscriber's name). In addition, if a caller does not know the mailbox number, she may
specify the mailbox by entering the first 3 or 4 letters of the owner's name. The VPS
will announce a series of recorded names from which the caller may select.
Subscriber's
Main Menu
Log into your
mailbox.
TO CHANGE
3
Press 3.
Press 1.
5
Press 5.
WHEN YOU CHANGE OR CLEAR YOUR PASSWORD
or
#
1
Press 1.
On-hook.
FOR THE FIRST TIME
5
Press 5.
1
State the name
at the tone.
2
Press 2.
New Password
Enter the new password and press #,
or press # to clear.
3
Press 3.
State the name
at the tone.
TO ERASE
or
2
Press 2.
Press 3.
Section 1
+
or
#
#
or
2
Press 2.
3
3
Press 3.
Mailbox Setup
On-hook.
9
Advertisement
Table of Contents
