Listening to Voice Mail Message(s)
—
Up to 4 minutes after receiving a voice mail message, the (VOICE MAIL
button will flash. To listen to your voice mail, perform the following steps.
] Press (VOICE MAIL).
,
>12-345-6789
e The speakerphone is turned on.
i
e The unit is connected to the telephone
line and automatically dials the number.
2 Follow the pre-recorded instructions.
3 When finished, press (SP-PHONE/HEADSET).
e The display will return to the stand-by mode.
Display
VOICE MAIL
uone
pad
FUNCTION/EDIT
SP-PHONE/HEADSET
e When the
button still flashes even if you have listened to
your voice mail message(s), press and release (FUNCTION/EDIT). Then
press and hold
until the unit beeps and press (EXIT). The
button will turn off.
.
e If your voice mail service uses a voice mail tone and the recorded
message is over 3 minutes long, the
button may not flash.
e If your voice mail service uses a voice mail tone, the tone will be heard
from any parallel connected phone. If you use another phone to retrieve
messages, you have to dial your access number manually.
39