Ricoh Pro 8100s User Manual page 213

Messages
"Cannot find "XXX" scanner
used for the previous scan.
"YYY" will be used instead."
("XXX" and "YYY" indicate
scanner names.)
"Cannot find "XXX" scanner
used for the previous scan.
"YYY" will be used instead."
("XXX" and "YYY" indicate
scanner names.)
"Communication error has
occurred on the network."
"Scanner is not available.
Check the scanner connection
status."
Messages Displayed When Using the Scanner Function
Causes
The main power of the
previously used scanner is not
set to "On".
The machine is not connected to
the network correctly.
A communication error has
occurred on the network.
The machine's power is off.
Solutions
Check whether the main power
of the scanner used for the
previous scan is turned on.
• Check that the previously
used scanner is connected
to the network correctly.
• Cancel the personal
firewall of the client
computer. For details
about firewall, see
Windows Help.
• Use an application such as
telnet to make sure
SNMPv1 or SNMPv2 is
set as the machine's
protocol. For details about
how to check this, see
"Remote Maintenance
Using telnet", Connecting
the Machine/ System
Settings .
• Select the scanner used for
the previous scan.
Check whether the client
computer can use the TCP/IP
protocol.
Turn on the power.
205