Ricoh Pro 8100s User Manual page 168

9. Troubleshooting
Problems
Misfeeds occur frequently.
Misfeeds occur frequently.
160
Causes
Using curled paper often causes
misfeeds, soiled paper edges,
or slipped positions while
performing staple or stack
printing.
The tray's side or end fences
may not be set properly.
Solutions
• Take the stiffness out of the
paper with your hands to
straighten out the curl.
• Load the paper up side
down so that the curled
edges face downward. For
details about
recommended paper, see
"Recommended Paper",
Paper Specifications and
Adding Paper .
• Lay cut paper on a flat
surface to prevent paper
from curling, and do not
lean it against the wall. For
details about the proper
way to store paper, see
"Paper Storage", Paper
Specifications and Adding
Paper .
• Remove the misfed paper.
For details about removing
jammed paper, see
"Removing Jammed
Paper", Troubleshooting
.
• Check that the side or end
fences are set properly.
Also, check that the side
fences are locked. For
details about setting the
side and end fences, see
"Changing the Paper
Size", Paper Specifications
and Adding Paper .