Ricoh Pro 8100s User Manual page 179

Messages
"Cannot print from the sub-
machine. Check the status of
the sub-machine."
"Cannot print from the sub-
machine. Check the status of
the sub-machine."
"Cannot print from the sub-
machine. Sub-machine will
be disconnected."
"Fold is available only when
Sort mode is selected in
Connect Copy."
"No stamp data in the sub-
machine."
"Sub-machine does not have
the same paper setting(s)."
"Sub-machine is in Interrupt
mode."
"Sub-machine paper settings
must be the same to use this
tray."
"The Cover Sheet setting(s)
of the sub-machine is
different from the main
machine."
Messages Displayed When Using the Copy/Document Server Function
Causes
A paper or staple jam has
occurred on the sub-
machine, or toner or other
supplies need to be
replaced.
The sub-machine's User
Tools menu is open.
The sub-machine has
stopped due to power
failure or communication
error.
Sort has not been selected
with fold.
Stamp data on the sub-
machine has been deleted.
Paper type or tray settings
on the two machines do not
match.
The sub-machine is in
Interrupt mode.
Paper tray settings on the
two machines do not match.
Cover Sheet settings on the
two machines do not match.
Solutions
• Follow the instructions displayed.
For details about adding toner,
see "Adding Toner", Maintenance
and Specifications
about jammed paper or jammed
staples, see "Removing Jammed
Paper" or "Removing Jammed
Staples", Troubleshooting
• If the sub-machine's display
indicates that a cover is open,
follow the instructions displayed.
Press the [User Tools] key to close the
User Tools menu.
Continue copying using the main
machine.
Select the Sort function.
Reprogram the stamp on the sub-
machine.
Make the same settings on both
machines.
Press the [Interrupt] key on the sub-
machine to cancel Interrupt mode.
Make the same settings on both
machines.
Make the same settings on both
machines.
. For details
.
171